How to Make a Mirror Without Spray Paint

Download Article

Download Article

To make a mirror, remove the glass panel from a picture frame and clean it thoroughly with rubbing alcohol. Then, spray the panel with mirror-effect spray paint, let it dry, and put the mirror back in the frame. Mirrors are an important fixture above dressers, vanities, and bathroom sinks. Sometimes, you can't find that perfect mirror, either because you can't find one that's the right size or has a design you like. Instead of settling for one that you don't like, you can always make your own out of a glass panel from a picture frame and special mirror-effect spray paint. Mirror-effect spray paint is glossier and more reflective than standard silver spray paint, making it ideal for creating unique mirrors.

1. 1

   Remove the glass panel from a picture frame. Choose a picture frame with a design that you like. Flip the frame over and remove the back panel. Discard any paper inserts, then remove the glass panel. Save the cardboard backing from the frame, however; you will need it to put everything back together.^[1]

2. 2

   Clean the glass panel with rubbing alcohol. Dampen a soft cloth or paper towel with rubbing alcohol, then wipe it over both sides of the glass. This is important because it will remove any oils that may prevent the paint from sticking.^[2]

   • Handle the glass panel by the edges from now on to avoid getting fingerprints on it.

3. 3

   Set the glass panel down in a well-ventilated area. It would be best if you worked outdoors, but a large room with open windows would also work. Place something under the glass to protect your work surface, such as newspaper or a cheap, plastic tablecloth.

   • Consider propping the glass up on some cans that are all the same height. This will prevent the paint from leaking under the glass.^[3]

4. 4

   Shake up your can of mirror-effect spray paint. Buy a can of mirror-effect spray paint.^[4] This can be found at most home improvement stores. The can should say "mirror-effect," "mirror-finish," or "transform(s) into a mirror" on it. Shake the can for the time recommended on the label, typically 20 to 30 seconds.^[5]

   • Don't use regular silver spray paint, even if the cap looks shiny. It is not the same thing and it will not work.

5. 5

   Apply 5 light coats of paint, allowing each one to dry. Hold the can 8 to 10 inches (20 to 25 cm) away from the glass. Apply a light coat of spray paint, using a side-to-side sweeping motion. Wait about 1 minute for it to dry, then apply a second coat. Keep repeating this step until the glass turns opaque. You'll need about 5 coats total.^[6]

   • Hold your hand under the glass to check its transparency. If you can see your hand, it is not opaque enough.
   • It is better to apply many thin coats of paint rather than 1 or 2 thick coats. It will take longer, but the finish will be nicer.
   • You are only applying paint to one side of the glass panel, not both.

6. 6

   Allow the paint to dry completely. How long this takes depends on the area that you live in; the cooler it is, the longer it will take to dry. In general, however, expect to wait about 10 minutes.^[7]

7. 7

   Insert the glass into the frame, with the painted side facing you. Place the frame face-down on the table, then set the glass panel inside. Make sure that the unpainted side is facing down, and the painted side is facing up. This way, when you flip the frame over, the paint will show through the glass.^[8] The glass will protect it from getting chipped or scratched.^[9]

8. 8

   Close the frame, then flip it over. Insert the back panel that you removed earlier back into the frame. Slide the hooks into place so that it does not fall out, then flip the frame over. Your mirror is now ready to use!

   EXPERT TIP

   Peter Salerno is the owner of Hook it Up Installation, a professional installation company, which has been hanging art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.

   

   Peter Salerno
   Installation Expert

   If you can't get your mirror centered on a wall, try a Cleat system. A Cleat system also works for heavier objects and is similar to a Z bar or extruded aluminum cleat. You don't want to hang a 75-pound mirror on a half-inch drywall just to center it where you want it, but you can use a Cleat system.

1. 1

   Take apart a picture frame. Remove the back panel from the frame, then discard any paper that you find inside. Keep the frame, back panel, and glass panel separate. For best results, use an ornate frame. Don't worry about the color, however; you can always paint it.

   • This method is similar to the basic mirror method, except that it has a spooky twist: a haunted face caught inside the glass!

2. 2

   Paint the frame, if desired. Since this will be a haunted mirror, you might as well crank up the spook factor. Shake the can first, then hold it 8 to 10 inches (20 to 25 cm) away from the frame. Apply 2 thin coats of paint, allowing each one to dry. Set the frame aside so that it can dry completely.

   • Be sure to work in a well-ventilated area, preferably outside.
   • Black paint will look the best, but you can use other colors as well.
   • If the frame is still not spooky enough, hot glue some fake spiders to it. Black, purple, or blood-red rhinestones will also give it a spooky feel.

3. 3

   Clean the glass panel using rubbing alcohol. Soak a paper towel or soft cloth with rubbing alcohol, then use it to wipe down both sides of the glass panel. Handle the glass panel by the side edges from now on, otherwise you may get fingerprints or oils over it, which can prevent the paint from sticking.^[10]

4. 4

   Find a spooky, black-and-white portrait with a dark background. Old, Victorian photographs work especially well. You can also print out a photo of a ghoul, zombie, or skeleton. You want it to look like the person in the photo is inside the mirror, so choose wisely!^[11]

   • The image needs to be smaller than your glass panel.

5. 5

   Print 2 copies of the image, with one of them being reversed. Print out the image first. Next, download it to an image editing program. Select the image, then use the editing tool to flip the image to the left or right. Print out the second image when you are done.

   • Most computers come with a free image editing program, such as Paint (for Windows). You can also use an image editing website.

6. 6

   Tape the reversed image to the glass panel. Set the glass panel over the image, then secure the paper to the edges with tape. You will be painting only part of the glass panel. The part that you leave bare will allow the spooky image to show through. Taping the reversed image to the glass will help you know which parts to leave bare.^[12]

7. 7

   Flip the glass panel over and apply a thin coat of mirror-effect spray paint. Turn the glass over so that the taped image is on the back. Apply a single light coat of mirror-effect spray paint over the entire glass panel. Hold the can 8 to 10 inches (20 to 25 cm) away from the glass and use a side-to-side sweeping motion. You should still see the image through it.^[13]

   • This step will give a mirror-like sheen to your image. If your image is very dark, the light coat may darken it even more. In this case, skip this step and move onto the next.
   • You must use mirror-effect or mirror-finish spray paint. It will say so on the label. Do not use regular silver spray paint, even if the cap is shiny; it will not work.

8. 8

   Apply more thin coats of mirror paint around the image. Decide which parts of the image you want to show up in the mirror: the entire face or just the screaming mouth? What about a grabbing hand? Spray the glass panel, taking care to avoid these areas. Allow each coat to dry for 1 minute before applying the next one. Plan on using about 5 thin coats total.^[14]

   • Make sure that you cover enough of the glass panel so that it will still look like a mirror from the front!
   • Don't worry if you overlap some areas that you meant to leave bare. This will make the mirror look more realistic.

9. 9

   Allow the paint to dry completely before removing the taped image. How long the paint takes to dry depends on where you live; the warmer it is, the faster it will dry. Once the paint has dried, flip the glass over and remove the taped image. Discard the image so that you don't get it mixed up with the right one in the next step.^[15]

   • The paint will take about 1 hour to dry completely.

10. 10

    Set the glass panel into the frame, painted side up. Flip the frame over so that the inside is facing you. Set the glass panel down into the frame with the painted side facing you. This is very important.^[16]

    • Don't worry, the paint will show through the glass in the end. The glass will protect the paint and make it shinier.

11. 11

    Insert the spooky image, face-down, then close the frame. Set the spooky image face-down on top of the painted glass. Make sure that it is oriented the right way, then place the frame's back panel on top. Slide the hooks back into place.^[17]

    • If the image is not oriented the right way, then the parts you wanted to show through may end up being covered by paint.

12. 12

    Use the frame as part of your décor. Flip the frame over and hang it up or stand it up on a table. The paint and the image will show through the glass. The paint will make it reflective, just like a real mirror, but the spooky image will peek through the patches that you left bare!^[18]

    • Drape a fake cobweb over a corner, then attach the other end of the cobweb to the wall behind the frame or the edge of the table.

Add New Question

• Question

  What materials do you need to make a mirror?

  

  Nicole Bolin is a Crafting Specialist and the CEO of Stencil, a DIY Craft Studio in Phoenix, Arizona. Nicole specializes in interior design and various craft and DIY projects. Nicole holds a BS in Animal Science from the University of Illinois at Urbana-Champaign and spent 15 years in the scientific field before switching careers. Nicole holds a Certificate in Interior Design from the New York Institute of Art and Design. She opened Stencil in 2017 to teach others to create DIY projects that fit their home and lifestyle.

  

  Crafts & DIY Specialist

  Expert Answer

  All you need to make a mirror is a piece of glass and mirror-effect spray paint!

• Question

  Does the glass spray paint actually show a reflection or is it just for decorative purposes only?

  

  It does actually turn it into a mirror, so you should see your reflection. Check the cap, for example --you should be able to see a bit of a reflection in the cap alone.

• Question

  Can I repair an old mirror?

  

  Yes, by using spray paint. But make sure your spray paint is metallic and glossy.

• Question

  What is mirror paint?

  

  Mirror paint is a special type of spray paint that looks like a mirror when you apply it to glass. It won't look like much until you actually flip the glass over so that the paint is on the back. It is more reflective than regular silver-colored spray paint.

• Question

  Can you make a mirror out of clear plastic?

  

  Yes, many items are made this way. Some plastics, like clear poly carbonate, look like glass mirrors, and some are even double coated so both sides serve as mirrors.

• Question

  Would the spray paint work on wood?

  

  Mike Haris

  Community Answer

  No, the wood will absorb the liquid and maybe leave a "dented" or rough mirror.

• Question

  How do you make a mirror out of actual glass?

  

  You don't. Normal mirrors (not DIY) are made by sputtering a thin layer of (usually) molten aluminum on glass in a vacuum chamber and then coating it with waterproof paint.

• Question

  Do I have to have mirror spray?

  

  The other option is putting molten aluminum onto glass inside a vacuum chamber, so mirror spray is the most effective option to do at home (and works almost as well).

• Question

  How do I make a concave mirror with this method?

  

  Use a concave glass panel and follow the steps above. Purchase a concave glass panel from an architectural supply store, or if it's going to be small, a glass blower can shape it to concave dimensions.

• Question

  How can I obtain the Krylon looking glass paint?

  

  You can buy it in an arts and crafts store, or you can buy it online. Other brands may also make looking glass paint. Search for terms like "mirror effect" or "mirror paint."

Show more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

• You can buy mirror-effect spray paint in arts and crafts stores as well as online.

• If your coats are very thin, you may need more than 5 coats of spray paint. Keep adding coats of spray paint until the glass is opaque.

• Glass panels will work the best, but you can try using plastic ones if that's all you can get.

• If you don't like the color of the frame, you can spray paint it before you put the glass back in.

• You can try these methods on regular glass panels without frames, but you will have to be careful with the back of the mirror. If the paint gets scratched or chipped, it will ruin the effect.

• You may find you need to cut your mirror down, which can be done with a few simple tools.

Things You'll Need

• Picture frame with a glass panel
• Mirror-effect spray paint
• Rubbing alcohol

• Ornate picture frame with a glass panel
• Mirror-effect spray paint
• Glossy black spray paint (optional, for frame)
• Rubbing alcohol
• Black-and-white photograph
• Tape
• Gemstones and/or fake spiders (optional)
• Hot glue (optional, for gemstones and/or fake spiders)

About This Article

Article SummaryX

To make a mirror, take the glass panel out of a picture frame and clean it well with rubbing alcohol, then lay it on sheets of newspaper in a well-ventilated area. Spray an even coating of a mirror-effect spray on one side of the glass. Allow the first coat to dry for about a minute, then repeat the process until you have about 5 coats of paint in total. Let the glass finish drying for 10 minutes, then place it back into the picture frame and secure the cardboard backing. To learn how to make a mirror that looks like it has a spooky face trapped inside, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 546,592 times.

Did this article help you?

How to Make a Mirror Without Spray Paint

Source: https://www.wikihow.com/Make-a-Mirror

Share this post